
A large truck or bus cannot turn like a small car. Its wheels follow a different path, its body may swing outward, and the driver may have limited visibility around the vehicle.
One of the most dangerous mistakes a two-wheeler rider or car driver can make is to squeeze into the narrow space beside a turning heavy vehicle. That gap may look open. But as the truck turns, the space can disappear.
This is a turning conflict, and it can have devastating consequences for anyone caught beside the vehicle.
Never mistake the space beside a turning truck for a safe place to travel.
1. Never squeeze between a turning truck and the kerb
A truck making a turn may need additional space. A motorcycle or scooter entering the gap between the vehicle and the kerb can become trapped in its turning path. Stay behind the truck and wait until it completes the turn.
2. Stay out of the truck’s blind spots
Heavy vehicles have areas around the front, sides and rear that may not be visible to the driver. If you cannot see the driver’s mirrors or make yourself clearly visible to the driver, do not assume the driver can see you.
3. Watch the front wheels and turning indicators
A truck’s movement may not always be obvious from the body position alone. Look for indicators, slowing, wheel movement and the vehicle’s positioning before a turn. Do not move into its path simply because it appears stationary.
4. Give the vehicle enough turning space
A long truck or bus may need to position itself differently before making a tight turn. Do not interpret a wide approach as an invitation to pass. Leave room and avoid entering the area where the vehicle is preparing to manoeuvre.
5. Never overtake a heavy vehicle at a junction
Approaching a junction, roundabout or narrow road, avoid overtaking a truck or bus that may be preparing to turn. The driver may not see you alongside, and the available road space can change quickly.
6. Keep a safe distance behind the vehicle
Do not follow so closely that you cannot see the truck’s indicators, road conditions or turning movements. Maintain enough distance to observe its intentions and respond without sudden braking or swerving.
7. Be especially careful near cycle lanes and footpaths
Cyclists and pedestrians may be travelling beside a large vehicle just as it begins turning. Drivers of heavy vehicles must check their surroundings carefully, while cyclists and pedestrians should avoid entering the vehicle’s immediate turning area.
8. Heavy-vehicle drivers must check before manoeuvring
Truck and bus drivers should use mirrors, indicators and appropriate observation procedures before turning. Where visibility is restricted, a trained spotter may assist. If the driver loses sight of the spotter, the vehicle should stop until communication is restored.
9. Wait patiently instead of competing for space
A few seconds of patience can prevent a serious collision. Do not race a truck through a junction, accelerate to pass it during a turn or force your way into a narrow gap. Let the large vehicle complete its manoeuvre before proceeding.
A turning-truck safety checklist
- Never enter the narrow space beside a turning truck.
- Stay clear of blind spots.
- Observe indicators and wheel movement.
- Do not overtake near junctions.
- Maintain a safe following distance.
- Give the truck room to manoeuvre.
- Watch for pedestrians and cyclists.
- Stop if you are uncertain about the vehicle’s path.
A message for fleet operators
Turning safety should be part of regular training for truck and bus drivers. Fleet operators should train drivers in blind-spot awareness, turning radius, mirror adjustment, safe positioning and spotter communication. Depots should also identify hazardous turning locations and reinforce safe manoeuvring procedures.
The final message
A truck’s turning space is not an opportunity to overtake. It is a danger zone that every road user must respect.
“Never compete with the turning space of a heavy vehicle. Give it room, and give yourself a chance to reach home safely.”
DRIVE SAFE. STAY SAFE.
@SafeRoadLife
Further reading
FMCSA — Our Roads
NHTSA — Motorcycle Safety
Ministry of Road Transport and Highways, India




